Notice:LT group is looking forward to cooperate with worldwide friends !
Rock Bolt
Your position now:Home > Rock Bolt

LT- pre-tension Resin Steel Rock Bolt

[ Time:2019-02-22 Click:1371 ]


 Rock bolt, in tunneling and underground mining, steel rod inserted in a hole drilled into the roof or walls of a rock formation to provide support to the roof or sides of the cavity. Rock bolt reinforcement can be used in any excavation geometry, is simple and quick to apply, and is relatively inexpensive. The installation can be fully mechanized. The length of the bolts and their spacing can be varied, depending on the reinforcement requirements.

There are three major ways of anchoring the rock bolts: mechanical, grouted, and friction. The most common grout-anchored rock bolt is the fully grouted rebar, a threaded bar made of steel. Cement or resin is used as the grouting agent. A cable bolt is a reinforcing element made of steel wires in the form of a strand or rope; it is installed in the borehole with cement grout.

微信图片_20180511084212

Super high duty, ultra high strength heat treatment rock bolt/ anchor bolt/ roof support system is an advanced steel products with prime quality and high performance, which can ensure the anchoring effect for complex ground conditions, such as sand and gravel to inconsistent fill, boulders, rubble and weathered rock. Raw materials are hot rolled steel rebars or deformed bars, using inductive heat treating technology (our patent). This product is widely used in tunneling, mining, slope stabilization and foundation support.

Our high duty high strength rock anchor bolt product have higher strength grade than normal hot-rolled rebars( for example, grade MG500,600,700,785,830 Mpa). This advantage of our product can decrease deformation of rocks, control or limit the breakage area in surrounding rock. It's good anti-impact property can resist sudden impact pressure, which can ensure the security of mining operation.

 

MECHENICAL PROPERTIES                                                                                     

  Steel Grade Yield Strength Tensile Strength Elongation After Fracture Elongation under Max Force Impact Absorb Energy
Rel/MPa Rm/MPa A/% Agt/% kv2/J
NOT LESS THAN
Industrial Standard MG335/MG400 335 500 15   40
MG500 500 700 22   100
Our company Standard 600 600 750 19 9 90
700 700 850 17 7.5 80
785 785 930 16 5.5 60
830 830 1030 15 4.5 50

 

 

GENERAL DIMENSION                                                                                              

 

Suface Type Nominal DiameterDn/mm Nominal Cross SectionSn/m㎡ Weight per meterg/m Top strength levelMPa
Levorotation,
no longitudinal rib
16 201.06 1578 800
Levorotation,
no longitudinal rib
18 254.47 1998 800/1080
Levorotation,
no longitudinal rib
20 314.16 2466 800
Levorotation,
no longitudinal rib
22 380.13 2984 800
Levorotation,
no longitudinal rib
25 490.88 3853 800/1080
Levorotation,
no longitudinal rib
28 615.75 4834 800
Levorotation,
no longitudinal rib
32 804.25 6313 800/1080

 

PRODUCTION PROCESS                                                                                            

 1. 600MPa ~ 700MPa

Raw material --- Heat Treatment --- Mechanical Property Test --- Sawing/Cutting --- Reduce diameter --- Screw thread --- Test --- Packaging --- Stock in

2. 335MPa ~ 500MPa

Raw Material --- Reduce diameter --- Screw thread --- Test --- Packaging --- Stock in

 

APPLICATION                                                                                                                

  • Coal mining
  • Hard rock mining
  • Civil construction
  • General construction
  • Geotechnical and Shoreline
  • Bridges
  • Dams
  • Infrastructure
  • Tunnels

Application

 

 

 

SAFETY CERTIFICATE OF APPROVAL FOR MINING PRODUCTS           

 safety certificate of approval for mining products  MSGLW-700 safety certificate of approval for mining products  MSGLW-600 safety certificate of approval for mining products  MSGLW-500 safety certificate of approval for mining products  MSGLW-400 safety certificate of approval for mining products  MSGLW-335

 

MODEL/TYPE : MSGLW-335/16,18,20,22,25

                               MSGLW-400/16,18,20,22,25

                               MSGLW-500/16,18,20,22,25

                               MSGLW-600/16,18,20,22,25

                               MSGLW-700/16,18,20,22,25

More information for our certificates, please contact infor@aylttg.com

 

 

 


Email:info@aylttg.com Tel:0372 2256782  
Add: Industrial Park, Indu District, Anyang City, Henan Province, P.R.China
Anyang Longteng Heat Treatment Material Co.,Ltd. ©  
豫ICP备17045909号-1
plus